OSB Board

Water Proofing

Roof Tile

Roofing truss strengthening connect parts

Model：WD194-20 Dimensions：194*130*2.0（mm） Material:  Q345 (Grade: SGH340 – Z275) Zinc layer:  2 sides 275 g/M2 Installation instructions The opening direction of the Roofing truss strengthening connect parts is from the bottom to the upper clamping truss, fixed with the outer hexagonal drilling screw. If one side of the Roofing truss strengthening connect parts flattened with the […]

Rhombus strengthening connect parts

Rhombus strengthening connect parts Model：LX210-20 Dimensions：210*189*2.0（mm） Material:  Q345 (Grade: SGH340 – Z275) Zinc layer:  2 sides 275 g/M2 Installation instructions Rhombus strengthening connect parts applied in connection of wall and roof trusses generally, and shall be applied in exterior wall as far as possible, in order to avoid unsmoothness in internal wall plates. the thin […]

Truss Bracket connect parts

Truss Bracket connect parts Model：LT141-20 Dimensions：141*134*2.0（mm） Material:  Q345 (Grade: SGH340 – Z275) Zinc layer:  2 sides 275 g/M2 Truss Bracket connect parts installation, clamp truss from bottom to top, fixed with outer hexagon drill tail screw, also be used to connect roof panels to trusses, same connection mode, compliance with relevant national standards, corner connect […]

Truss strengthening connect parts

Truss strengthening connect parts Model：HK115-20 Dimensions：115*59*2.0（mm） Material:  Q345 (Grade: SGH340 – Z275) Zinc layer:  2 sides 275 g/M2 Installation Instructions Truss strengthening connect parts, normally, used in the connection the wall and the truss，according to the installation station can be used in the inner wall or external wall with thin flat or round head washer […]

Truss connect parts

Truss connect parts Model：HJ115-20 Dimensions：115*79*2.0（mm） Material:  Q345 (Grade: SGH340 – Z275) Zinc layer:  2 sides 275 g/M2 Installation instructions Truss connect parts, normally, used in the connection the wall and the truss, according to the installation station can be used in the inner wall or external wall with thin flat or round head washer drlling […]

Wind resistance connect parts

Wind resistance connect parts Model：KF160-20 Dimensions：160*40*2.0（mm） Material:  Q345 (Grade: SGH340 – Z275) Zinc layer:  2 sides 275 g/M2   Installation Instructions Wind resistance connect parts, normally, used in connection the wall and truss with thin flat or round head washer drlling screw, Wind resistance connect parts used in the outsides wall is better and prevent […]

Corner connect parts

Installation instructions Corner connect parts, more used for wall internal corner of connection with thin flat or round head washer drlling screw, screw full used, use 3 or more corner connect parts for each wall internal corner. installed in the wall internal corner, can be used with the outside wall sunny corner ZB121 connect parts […]